Franken-AFVs

[Tegyrius]

Over in the recent LAV-25 thread, cawest and StainlessSteelCynic had some thoughts about field-expedient AFV modifications. In the spirit of technicals writ large, what are your most implausible turret transplants or other AFV hacks that might have arisen in the Twilight: 2000 universe

For me, I've got a few:

From published canon, it's the M691 Diana (American Combat Vehicle Handbook, p. 72). Visually, it's the epitome of the musclebound dude with the tiny head stereotype. But it's also a waste of a perfectly good Abrams chassis. I mean, why put an ADA turret on that when you can put an M1 turret on it and have another M1

Also from canon, there's a throwaway line in the Stingray's description (American Combat Vehicle Handbook, p. 41) about its turret being transplantable to the wheeled Cadillac Gage Commando models. Well, it might work - consider the AMX-10-RC - but sticking a light tank turret on top of an M706 seems a lot like putting a 75mm recoilless rifle on a Vespa.

For homebrew factory modifications, I'll submit my old Louisville Slugger from 2011's US Army AAA in T2k thread. Because nothing screams "ridiculous" like a CIWS jutting up from a Bradley chassis, swiveling around in full autonomous mode, and terrorizing everyone who's seen The Terminator.

- C.

[pmulcahy11b]

I have over in my Best Tanks that Never Were: A T-72 hull with a Leclerc turret. Got the idea from deviantART. I have a whole back story about how this came to be and a little bit of how it did in the Twilight War.

[CDAT]

I do not remember where I saw it, but putting two GAU8 on a M1. For both ADA and urban combat.

[Raellus]

ZU-23-2s mounted to the backs of MT-LB is a fairly common phenomenon. In some cases, it may be a purpose-built model (MT-LBM izdeliye 6MB5); in others, it appears to be a field expedient battlefield modification.

Although not strictly-speaking "Franken-AFVs", because nothing significant is being added, only taken away, I think you'd see a lot of tank and IFV hulls with the turret removed (due to irreparable damage/lack of spare parts) serving as ersatz APCs in the later days of T2K.

[Raellus]

Mohoender found this photo of BTR-60 mounting an AML-90 turret (presumably somewhere in W. Africa) several years back.

[mcchordsage]

Sticking support weapons on MT-LBs seems to be a proud tradition wherever they're found. The Syrians re-gunned some with 57mm guns, they and the Iraqis have put armored cupolas on them either around existing gun mounts or to make new ones, the Ukranians have replaced the SAM arms with helicopter rocket pods for MLRSes.





And a Libyan Humvee with an AML-90 gun I saved from somewhere. They were sold so many places in such volume, there are all kinds of reuses of their guns and turrets. Second is Djibouti MRAPs with AML turrets.




Two Vietnam era examples, featuring helicopter miniguns on ground vehicles.

[StainlessSteelCynic]

At least with the recoilless rifle on the Vespa, it was a movement solution, not a combat solution. The Vespa was solely for transporting the recoilless rifle and it was never meant to be fired from the vehicle.

[Jason Weiser]

Over in the recent LAV-25 thread, cawest and StainlessSteelCynic had some thoughts about field-expedient AFV modifications. In the spirit of technicals writ large, what are your most implausible turret transplants or other AFV hacks that might have arisen in the Twilight: 2000 universe

For me, I've got a few:

From published canon, it's the M691 Diana (American Combat Vehicle Handbook, p. 72). Visually, it's the epitome of the musclebound dude with the tiny head stereotype. But it's also a waste of a perfectly good Abrams chassis. I mean, why put an ADA turret on that when you can put an M1 turret on it and have another M1

Well, I think GDW came up with the idea because they figured by the time the war rolls around there's PLENTY of Abrams hulls to go around. I doubt it, and you're right, but then again, considering the mobility of the M1/M2 series You really do need something that will keep up with them.

Also from canon, there's a throwaway line in the Stingray's description (American Combat Vehicle Handbook, p. 41) about its turret being transplantable to the wheeled Cadillac Gage Commando models. Well, it might work - consider the AMX-10-RC - but sticking a light tank turret on top of an M706 seems a lot like putting a 75mm recoilless rifle on a Vespa.

I would hate to be the poor guy who is in the vehicle when it engages a target to the flank. I think the recoil might cause a rollover.

For homebrew factory modifications, I'll submit my old Louisville Slugger from 2011's US Army AAA in T2k thread. Because nothing screams "ridiculous" like a CIWS jutting up from a Bradley chassis, swiveling around in full autonomous mode, and terrorizing everyone who's seen The Terminator.

So this is where Skynet came from Seriously, it read like the experiences of WWI crews, who cheerfully got into their tanks, got bashed around, risked getting killed any number of ways and had the fumes from firing and the engine fill the cabin. They would then celebrate their survival by when they actually came to a halt, promptly dismounting and throwing up.

But seriously, Libya in 2011 had some truly weird stuff.



BMP turret on a cutdown HMMWV hull, don't see that every day.



This was common enough, someone made a model kit out of it



Proof you can mount ANYTHING on a Toyota Hillux, including a rocket pod meant for an aircraft.



Hillbilly armor on a T-55. Well, that is a bit new.

Speaking of T-55s, let's discuss Iraq's entry into the "T-55 Pimp My Ride Sweepstakes." yeah, the Enigma.

Better yet, I'll let these guys discuss it, it's crude, it's rude, it makes engineers weep with "Why the hell did you people do this"

https://tanks-encyclopedia.com/modern/Iraq/t-55-enigma/

[Tegyrius]

Well, I think GDW came up with the idea because they figured by the time the war rolls around there's PLENTY of Abrams hulls to go around. I doubt it, and you're right, but then again, considering the mobility of the M1/M2 series You really do need something that will keep up with them.

As we all know, the real-world answer to that mobility issue was the Bradley Linebacker. Oddly, I don't think there's a canonical Bradley-based ADA platform in T2k.

So this is where Skynet came from Seriously, it read like the experiences of WWI crews, who cheerfully got into their tanks, got bashed around, risked getting killed any number of ways and had the fumes from firing and the engine fill the cabin. They would then celebrate their survival by when they actually came to a halt, promptly dismounting and throwing up.

That was not the design intent, but it works.

- C.

[cawest]

I was thinking of was taking like a LAV and replacing the turret with a single or twin 23mm or a recovered 30mm from a BMP. you could maybe even go with a 40mm like they are doing with the new Stryker. Maybe a 57mm in a thin skin turret.

But what if you have a tank with a turret blown off or otherwise that can not be fixed. you could take a page from WW 2 Kangaroo or you can put other weapons. Egypt and a few others have 130mm cannons mounted on them (without turrets). In Twilight 200 I would not go that way, but you can used that hull to carry heavy weapons.

lets take the t-72 with out a turret.

take part of the Kangaroo and build up the hull's turret ring. (it will not be armor plate but steel. take the turret ring from BMP or a ZSU23-4 Shilka.

you can mix an match this method a M1/m60 hull with a Shika or ZSU 57-2

[StainlessSteelCynic]

One of the most important things to consider here is turret ring size. Will the borrowed turret even fit the vehicle Will you have to make a new deck & turret ring to fit the borrowed turret to the hull
After that are the various requirements for turret rotation (mechanical, electrical, manual, etc. etc.) and installing the needed components.
Before that you have to find out whether the vehicle (or turret if giving it a different weapon) can handle the recoil of the weapon because that would mean extra gear to counter recoil forces.
Then there's the ammunition feed & storage. They will have to be changed to accommodate the different ammo requirement.
If you're just cramming a different (and larger calibre) weapon into the vehicle's standard turret, how crowded will this new weapon make the turret

It's for all these reasons that I suggest making this sort of conversion a side-adventure for any Players who want to convert a vehicle. Finding a vehicle already converted is a different situation and I'm not attempting to address that.

[Olefin]

One of the most important things to consider here is turret ring size. Will the borrowed turret even fit the vehicle Will you have to make a new deck & turret ring to fit the borrowed turret to the hull
After that are the various requirements for turret rotation (mechanical, electrical, manual, etc. etc.) and installing the needed components.
Before that you have to find out whether the vehicle (or turret if giving it a different weapon) can handle the recoil of the weapon because that would mean extra gear to counter recoil forces.
Then there's the ammunition feed & storage. They will have to be changed to accommodate the different ammo requirement.
If you're just cramming a different (and larger calibre) weapon into the vehicle's standard turret, how crowded will this new weapon make the turret

It's for all these reasons that I suggest making this sort of conversion a side-adventure for any Players who want to convert a vehicle. Finding a vehicle already converted is a different situation and I'm not attempting to address that.

An excellent post - and would make an interesting exercise for the players and the GM to thru as a way to have to gather the materials and expertise to do that - let alone the facility you would need to be able to do something like that

I could see players who are adventuring in CA possibly doing this in conjunction with the facility that Littlefield had - i.e. if anyone has the expertise to make a working FrankenAFV its him and his mechanics - and they had the facility - now its up to the players to get the parts he needs

[Vespers War]

I do not remember where I saw it, but putting two GAU8 on a M1. For both ADA and urban combat.

I'm not sure about paired GAU-8, but the GE entry for DIVAD was an Abrams with a shortened Avenger, since they were already building the gun for the A-10.

For paired guns, the Abrams-based Liberty II had a pair of 25mm Bushmasters and 12 Crotale NG missiles. It was proposed for FAADS, the replacement for DIVAD, by Thomson and Vought.

[cawest]

or something like this https://tanks-encyclopedia.com/modern/Iraq/T-55-130SPG

[StainlessSteelCynic]

I can see something like the following happening in basic workshops: -





And there's plenty more where that came from...
Images from this site: - https://philippinestoday.blogspot.co...ood-armor.html

And even improvised fighting vehicles such as trucks given armour and carrying a field gun portee-style like this: -



Image from wiki: - https://en.wikipedia.org/wiki/Port%C3%A9e_(military)

But as mentioned in my earlier posts, I think for armoured vehicles, replacing the turret or main armament with something the vehicle was not originally configured for, would take skilled personnel with a proper workshop (e.g. one that can do repair & refurbishment levels of work)